Nuvoton NuLink & NuLinkMe
Nuvoton NuLink & NuLinkMe are both debugging probes which support debugging target devices with CooCox CoIDE, Keil Realview MDK and IAR Embedded Workbench.
Features:
- Supports SW debugging
- Supports debugging in CoIDE, MDK and IAR
- Supports Nuvoton ARM Cortex M0 based chips
|
|
LED Interface Descriptions:
NuLink LED Descriptions:
| LED Interface |
Status |
Descriptions |
| ICE LED |
Red |
USB Interface configured |
| ICP ISP LED |
Green |
Indicate error occurs |
| BUSY LED |
Green |
Busy, device has been opened |
| IDLE LED |
Red |
Undefined |
NuLinkMe LED Descriptions:
| LED Interface |
Status |
Descriptions |
| ICE LED |
Green |
USB Interface configured |
| ICP ISP LED |
Red |
Indicate error occurs |
| BUSY LED |
Red |
Busy, device has been opened |
| IDLE LED |
Green |
Undefined |
Debug Interface (JP8) Descriptions:
| Pin |
Description |
Pin |
Description |
| 1 |
VCC |
2 |
not connected |
| 3 |
ICE_DAT |
4 |
not connected |
| 5 |
ICE_CLK |
6 |
not connected |
| 7 |
ICE_ RST |
8 |
not connected |
| 9 |
GND |
10 |
not connected |
Supported Device:
- NUC100LC1BN, NUC100LD1BN, NUC100LD2BN, NUC100RC1BN, NUC100RD1BN, NUC100RD2BN
- NUC100LD3AN, NUC100LE3AN, NUC100RD3AN, NUC100RE3AN, NUC100VD2AN, NUC100VD3AN, NUC100VE3AN
- NUC120LC1BN, NUC120LD1BN, NUC120LD2BN, NUC120RC1BN, NUC120RD1BN, NUC120RD2BN
- NUC120LD3AN, NUC120LE3AN, NUC120RD3AN, NUC120RE3AN, NUC120VD2AN, NUC120VD3AN, NUC120VE3AN
- NUC122LC1AN, NUC122LD2AN, NUC122SC1AN, NUC122SD2AN, NUC122ZC1AN, NUC122ZD2AN
- NUC130LC1CN, NUC130LD2CN, NUC130LE3CN, NUC130RC1CN, NUC130RD2CN, NUC130RE3CN, NUC130VE3CN
- NUC140LC1CN, NUC140LD2CN, NUC140LE3CN, NUC140RC1CN, NUC140RD2CN, NUC140RE3CN, NUC140VE3CN
- M0516LBN, M0516ZBN, M052LBN, M052ZBN, M054LBN, M054ZBN, M058LBN, M058ZBN
- Mini51LAN, Mini51ZAN, Mini52LAN, Mini52ZAN, Mini54LAN, Mini54ZAN
NuLink & NuLinkMe is available in:
- CooCox CoIDE V1.0.0 or higher (How to use in CoIDE)
- Keil RealView MDK V4.12 or higher
- IAR Embedded Workbench V5.xx
** To use Nulink in the environment above, please update the firmware of Nulink first.
Other Useful Information:
|
|
